AIDMER®

Teflon® is a registered trademark of E.I. Du Pont De Nemours and Company used under License by Fluoro-Plastics, Inc. Only Dupont makes TEFLON®.

PTFE TEFLON

PTFE TEFLON®

 
PTFE Applications PTFE Properties PTFE History Quality Control Honor Marketing Factory Corner New Center Contact Us
 
TeflonŽ ROD PTFE
TeflonŽ FILLED PTFE
TeflonŽ HOSE PTFE
TeflonŽ SHEET PTFE
TeflonŽ TUBING PTFE
TeflonŽ Gsket PTFE
TeflonŽ FILM PTFE
TeflonŽ MACHINE
Virgin PTFE Resin Powder
 
PTFE Sheet
Thick: 1 ~ 50 mm
Sizes: 610, 1000,  1220
PTFE Rod
Diameters: 2 ~ 400 mm
PTFE Tube
Inside Diameter 1.2 ~ 600mm
PTFE Rolls
0.02 ~ 6mm thick, 1000mm  1200mm wide
PTFE Coiled hose
Inside Diameter: 1.2 ~ 35 mm

AidmerŽ, a leading manufacturer of Teflon products, Teflon Sheets, Teflon Rods, Teflon Tubing, Teflon Films, Teflon Hose and Teflon Gaskets.

TeflonŽ - Skived FilmTeflon Film, PTFE Film, Teflon Films,: PTFE Films.china PTFE : Teflon manufacturer

  • Aidmer76-112 TeflonŽ Film

TeflonŽ Film has a wide range of practicable temperature from -180C~+260C and a wax-like surface to which anything hardly Film. TeflonŽ Film has the lowest coefficient of friction of all known solid materials. TeflonŽ Film has the best electrical properties of all plastic Film. Use of the TeflonŽ Film The electrical insulation used under various kinds of frequency, the seal liner of various kinds of corrosivity medium, Antisticking materials, lubrication material.

Skived TeflonŽ Film is made by plunger extrusion of suspension polymerized TeflonŽ resin. Among all the existing plastics.  Lead insulating film, corrosion-resistant Skived TeflonŽ Thin Film, and corrosion-resistant insulating Skived TeflonŽ Thin Film for different corrosive conditions, heat exchanger. Skived TeflonŽ film exhibits good strength, abrasion resistance and low friction. It conforms well to irregular surfaces and offers higher elongation than our high modulus skived TeflonŽ. These tapes are used widely on printing and duplicating machinery to help paper slide while remaining resistant to chemicals and inks.

Project Name Unit Result
Apparent Density g/cm3 2.1 ~ 2.3
Tensile Strength Mpa ≥ 14.0
Ultimate Elongation % ≥ 150
Thick( mm ) 0.03mm; 0.04mm 0.06mm, 0.08mm, 0.1mm ... 0.4mm, 0.5mm, 0.6mm
Width ( mm ) 100mm, 300mm,  500mm, 1000mm, 1220mm
length ( mm ) 1000mm, 2000mm, 5000mm, 10000mm, 15000mm, 20000mm ....
Last PageNext Papge

TEL:0086-792-2838188; 2837628 FAX:0086-792-2837559

China Teflon : PTFE

Add: WanFu Economic Development Zone, Wuning, Jiujiang City, Jiangxi, China

Email: Teflon@live.cn  Aidmer@chinese-PTFE.com  ŠCopyright 2003-2006 AIDMER® PTFE TeflonŽ FILM Manufacturer